Cost: $9.59
( since Dec 22,2021 22:47:01 UTC – Information)
Functions:
How to set up:
1. Switch off power to your dishwashing machine. (Ensure to prevent shock)
2. Turn lower gain access to panel fasteners to eliminate them.
3. Get rid of the gain access to panel or sound moistening pad. Judge whether the water system or power lines have sufficient slack to move the dishwashing machine. If not, you will require to shut off the water system valve, detach the water system line from the inlet valve and launch the power line from the junction box.
4. Open the dishwashing machine door, loosen the screws from the existing brackets.
5. Next will be moving the dishwashing machine. To do so, you require to decrease the dishwashing machine by changing the leveling legs.
6. Thoroughly pull the dishwashing machine a couple of inches far from the front of the cabinet.
7. Usage pliers to bring up tabs in back of the bracket (if present). Take out brackets which are previous used.
8. Place fresh brackets. Usage pliers to change the back tab to lock the brackets in location.
9. Move the dishwashing machine back into the cabinet (adjusting the leveling legs, if essential). Change the screws in your fresh brackets.
10. Reverse actions 3, 2 and 1.
Requirements:
Size: about 3 inches in length and 1 inch in width (at the largest)
Color: as displayed in the photo
Product: galvanized steel
Plan consists of:
4 x Undercounter installing brackets
4 x Installing screws
Warm notes:
Please permit a little mistake on the size due to manual measurement.
The color may exist small distinction due to various screens.
Please check out the size direction thoroughly prior to buying.
The reference of trademark name and any associated designs above is just for functions of showing compatibility. Our brand is Honoson.
Adequate and sufficient: you will get 4 pieces dishwashing machine brackets, big amount for you to utilize in every day life; Every one procedures roughly 3 inches in length and 1 inch in width (at the largest), appropriate size for you to use
Robust and dependable: installing brackets are made from quality galvanized steel product, which can serve you for a long period of time and have steady efficiency, strong and robust, hence you can use with self-confidence
Several compatibility: undercounter dishwashing machine bracket works with WP (TM), Amana (TM), Crosley (TM), Maytag (TM), Roper (TM) and Inglis (TM)
Wide use: dishwashing machine installing brackets work with 8269145, WP 8269145, AP 3039168, PS 393134, 830941, AH 393134 and EA 393134
Easy to set up: with setup directions listed below, you can set up the kitchen area help dishwashing machine bracket quickly, conserving your energy and time.
